Audit case TE6000E for standardized testing according to DIN EN 61340-5-1
- Product number:
- 94000006000
- In stock:
Audit kit for qualifying and verifying conformity of products for ESD control according to IEC/EN/DIN 61340 and ANSI/ESD STM series.
Main features:
Main features:
- Metal plate 350 x 200 mm with button connection
- Voltmeter with accessory kits
- For walking test with hand electrode
- For ionization tests
- USB connection to PC and software
- Teraohmmeter with measuring range from 1 kΩ to 2 TΩ
- Alphanumeric display
- Integrated temperature and humidity sensor
- 30 memory locations
- Automatic shutdown after 5 minutes
- Suitable for use in the field or in the laboratory with software, the instrument can be controlled on a PC and the measured values can be saved directly
- Tolerance approximately ± 10%
- Measuring range 1V to 160kV
- The analog output is only active in E-field mode and can be used via the UAC110 A/D converter for connection to a PC with KL-ReadOut software
- Convenient single-pole operation
Dimensions: 500mm x 400mm x 120mm (L x W x H)
Weight: approx. 10 kg
Package contains:
Weight: approx. 10 kg
Package contains:
- Voltmeter (9V battery not included)
- Attachment for test measurement of gait with hand electrode
- Attachment with charge plate for ionization test
- Charge generator
- Teraohmmeter
- Plug-in power supply unit
- 1 measuring cable of 1 m and 5 m each
- 2 measuring electrodes 2.5 kg
- 1 piece TPME-01 miniature two-point rod electrode, measuring voltage up to 100V max
- 1 pc metal plate 350 x 200 mm including 10 mm button
- 1pc AD10 Insulated alligator clip with banana socket, 10mm DK
- 1pc PLG610 grounding plug with 2 x 10mm DK and 1 x M5 ring connection
- 1 piece of textile wristband with 10mm DK
- 1 piece spiral cable 10mm DK to 10mm DK 3.6m long- 1 sheet EPP/H test badge holder 60x35mm, PVC film, sheet 20 pieces, additional check
- Annual inspection stickers 15x15 mm, PVC film, 2 sheets of 30 pieces
- USB cable
- Software for PC
- Operating Instructions
- Robust aluminum case
The devices and electrodes are intended for measuring voltages up to 100 V according to the standards of the IEC 61340 series.
Operating temperature: 0 °C to 60 °C.
Calibration is available on request (recommended calibration cycle: 1 year).
Operating temperature: 0 °C to 60 °C.
Calibration is available on request (recommended calibration cycle: 1 year).