SX10LPB/SK Bubble bags with flap and sealing stri0 150x300 + 50mm

Packaging: 1x100 pcs

ATTENTION!!! Minimum order = 5 packs

scope of application
As direct/adjacent packaging for ESDS within a shielding packaging or for insensitive components for safe introduction into an EPA
Dimensions
first dimension (short side) is opening side
50mm tab with 12mm SK locking hoop
Weld seam width 12 mm
Design/Execution
Flat bag with side seam, 3-layer film structure, 5 mm nubs
imprint
Without pressure
Material raw/material group
PE-LD with ESD equipment
Technical note
Not suitable as sole, adjacent packaging for electrostatically sensitive components (ESDS) outside of the EPA!
Colors)
pink
Recyclability
Yes
Weldability
Yes
Surface resistance (value | unit | norm)
7.5x10e10 | Ω | IEC 61340-2-3
Density (value | unit)
0.915 – 0.935 g/cm3
Film thickness (mm)
0.075
durability
Experience has shown that the electrical properties were unchanged after 36 months when stored optimally.